Olight Olantern Classic 2 Pro: our full review

Under its copper storm-lantern looks, the Olantern Classic 2 Pro hides a 40.32 Wh battery that doubles as an 18W power bank, a 300-lumen setting that only holds for 20 minutes, and a runtime that contradicts the maker's claims in both directions.

Our rating
3.8/5
Capacity and runtime: 4.0 out of 5 (weighting 25%)Capacity4.0Output power: 3.6 out of 5 (weighting 20%)Power3.6Size and weight: 3.6 out of 5 (weighting 20%)Size3.6Ports and cables: 3.6 out of 5 (weighting 15%)Ports3.6Recharging: 4.0 out of 5 (weighting 10%)Recharging4.0Build and endurance: 4.0 out of 5 (weighting 10%)Build4.0

How is this rating calculated?

Olight Olantern Classic 2 Pro copper camping lantern, glowing dome lit up, control knob and Olight logo visible on the base

The essentials

The Olantern Classic 2 Pro succeeds first as a lantern: continuous light from 10 to 300 lumens, two clearly distinct tints around 1850 K and 3000 K, and a metal build that never creaks. Its power bank function is real, with USB-C and USB-A outputs and a full charge in 4 hours, but the 18W ceiling requires a 12V step that few smartphones will request, and the 300-lumen setting only holds for 20 minutes before stepping down. Two reservations weigh on longevity: the battery, not replaceable despite using an otherwise standard 18650 format, and a warranty limited to 2 years on this lantern line. On this review, the rating reflects the site's standard grid for power banks, applied to a device whose main function is lighting: it says nothing about the light quality, which is genuinely strong, but about how the device holds up as a backup power bank.

Strengths

  • 318 lumens on the warm white maximum rated at 300, 134 lumens on the orange setting rated at 130
  • Two clearly distinct tints: about 1850 K (CRI ~90) in orange, about 3000 K (CRI ~82) in warm white
  • Full charge in 4 hours via an 18W USB-C source, a solid rate for 40.32 Wh
  • Charges a phone from under 50% to full in about ninety minutes
  • Genuinely well-built: steel frame, 2mm polycarbonate globe, Torx screws, no play or creaking anywhere
  • Runtime on the most economical setting far exceeds the claim: 276 hours against a stated 180 hours

Limitations

  • The 300 lm setting only holds for 20 minutes before a first step-down to 200 lm, then a second to 150 lm
  • Runtime on the brighter settings falls well short of the claims: 14h 01m instead of 23h on sustained orange, or 61%
  • The 18W output ceiling requires a 12V step that most USB-C smartphones never request; a typical phone charge runs closer to 5V and 1.5A, about 7.5W
  • Battery not replaceable despite using 18650 cells, a format that is normally standard and swappable in other lights
  • Charging via the magnetic dock takes about twice as long as via cable: roughly 10 hours against 4
  • A 2-year manufacturer warranty on this lantern line, outside the lifetime coverage Olight now offers on its flashlights and knives
Olight Olantern Classic 2 Pro: see the full details and price →

The power bank function: 18W on paper, less in practice

The Olantern Classic 2 Pro is not just a lantern: its 40.32 Wh battery also feeds two outputs, USB-C and USB-A, rated to deliver up to 18W to recharge a phone or a small accessory during a power cut or a camping trip far from an outlet. The principle genuinely works, but the 18W ceiling is not guaranteed regardless of what gets plugged in.

Both ports offer an adaptive voltage across three steps, 5V, 9V and 12V, each paired with a different maximum current. The full 18W is only reached at the 12V step. Most recent USB-C smartphones, however, negotiate their charge at 5, 9, 15 or 20V under the USB Power Delivery standard, rarely at a fixed 12V. In practice, plugging an ordinary smartphone into the Olantern most often settles around 5V and 1.5A, about 7.5W, well short of the ceiling printed on the spec sheet.

Voltage steps available on the USB-C and USB-A outputs
VoltageMaximum currentPower
5Vup to 2.4A12W
9Vup to 2A18W
12Vup to 1.5A18W

This is not a hidden flaw so much as the same logic behind most fixed-step fast-charging ports, which need the receiving device to know how to ask for the right voltage. A small USB fan, a headlamp or a 12V accessory will make full use of it. A smartphone will most often settle for a noticeably slower charge than the spec sheet suggests.

18 W
ceiling at the 12V step
7.5 W
typical smartphone charge
40.32 Wh
total energy stored
2
outputs, USB-C and USB-A

The result is still useful: a phone at under 50% regains a full charge in about ninety minutes from the Olantern's port. Enough to get through to the next morning without packing a dedicated power bank, though it won't replace a fast, dedicated power bank for heavy daily use.

Worth noting: the stated 18W is a ceiling, not a universal promise. It requires the connected device to accept the 12V step, a condition most smartphones don't meet.

300 lumens claimed, 20 minutes held

The Olantern Classic 2 Pro's rotary knob covers the entire brightness range in a single continuous motion, with no detents or fixed steps. Starting from the minimum, the orange light climbs from 10 to 130 lumens, then the lantern switches to its warm white diodes to climb further, up to 300 lumens. Nothing physically marks the switch between the two tints, which can be surprising the first time you pick it up.

The stated levels are met, and even slightly exceeded in the first seconds after switching on: 134 lumens on an orange step rated at 130, 142 lumens on the warm white low step rated at the same value, and 318 lumens on the warm white maximum rated at 300. The two tints are clearly distinct: about 1850 K with a colour rendering index around 90 for orange, about 3000 K with an index around 82 for warm white.

The 300-lumen maximum, however, is not a setting held over time. It only lasts 20 minutes before the lantern automatically steps down to 200 lumens for 8 hours, then to 150 lumens for 16 hours 40 minutes. This is a deliberate thermal and energy trade-off, but the spec sheet presents these three steps as a single "high" mode without spelling that out.

Brightness over time for the Olantern Classic 2 Pro's warm white high mode across 25 hours. The 300-lumen step lasts only 20 minutes, then the lantern steps down to 200 lumens for 8 hours, then to 150 lumens for 16 hours 40 minutes.300 lm claimed300 lm, 20 min200 lm, 8h150 lm, 16h 40m05h10h15h20h25h
Brightness steps on warm white high mode. The 300-lumen maximum only holds for 20 minutes before a first step to 200 lumens, then a second to 150 lumens.

Throw distance is not this lantern's selling point, built as it is to light a 360° area rather than reach far: about 10.5 metres at maximum on the orange setting and close to 14 metres on warm white at maximum, figures in line with a campsite lantern rather than a long-range signal light.

Runtime: short of the claims up top, far past them at the bottom

The gap between the claim and reality does not run the same way depending on the setting used, and that is the single most useful fact in this review. On the two brighter settings, runtime down to 10% of initial output, the flashlight industry's standard yardstick, falls well short of the maker's claim. On the most economical setting, it's the opposite: runtime goes well beyond it.

Claimed runtime against actual runtime, by setting
SettingClaimed runtimeActual runtimeGap
Orange, 130 lm23h14h 01m61% of claim
Warm white, 300 lm (steps combined)25h17h 56m72% of claim
Orange, 10 lm180h276h153% of claim
Olantern Classic 2 Pro runtime as a percentage of the maker's claim. Orange at 130 lumens reaches 61% of claim, warm white at 300 lumens reaches 72%, orange at 10 lumens reaches 153%.100% of claimOrange 130 lm14h 01m (61%)Warm white 300 lm17h 56m (72%)Orange 10 lm276h (153%)
Runtime as a share of the maker's claim: short on the two brighter modes, well above it on the most economical one.

The mechanism makes sense. The 10% cutoff applies to a high starting brightness: on warm white, that works out to 30 lumens, a level the lantern crosses fairly quickly once the battery is partway through its discharge. On the most economical setting, by contrast, 10% of 10 lumens is a barely perceptible glow, so the lantern keeps being useful well past that theoretical cutoff, and the maker's claim, conservative on this point, ends up beaten by a wide margin.

For ordinary camping use, this flips the usual advice on its head: relying on the most economical setting for several nights pays off even more than the spec sheet suggests, while counting on a full 23 hours at the comfortable 130-lumen setting is optimistic.

Charging: 4 hours by cable, more than double that on the magnetic dock

A full charge over USB-C cable takes about 4 hours with an adapter capable of delivering the needed 18W. That's a solid rate for 40.32 Wh, consistent with the stated input power, and a figure that comes up consistently across every spec sheet.

A magnetic charging dock ships alongside it, a handy alternative when the USB-C port is already in use or hard to reach once the lantern is set down. The convenience comes at a cost in speed, though: a full charge over the magnetic dock takes about 10 hours, more than twice as long as by cable. Olight states this itself in its documentation, without ever leading with it in its marketing.

An LED indicator built into the base shows charge status at a glance: red while charging, green from 95% onward. One cabling detail is worth knowing before buying: a USB-A-to-C cable will not reach the same charging speed as a genuine USB-C-to-C cable, the difference coming down to the power negotiation that only the latter can carry out properly.

4 h
full charge via USB-C cable
10 h
full charge via magnetic dock
95 %
green-light threshold

The manual also states a storage limit worth respecting: a temperature above 60 °C, for instance inside a car in summer, is not recommended for the built-in battery. A simple precaution, but a useful one for a lantern meant to travel in a car trunk or a camping bag.

Don't confuse it with the Smart version

Three lanterns now carry a very similar name at Olight, and mixing them up means buying the wrong one. This review covers the original Olantern Classic 2 Pro (EAN 6972378126177), controlled solely by its rotary knob, with no Bluetooth or app. Two other versions exist and don't share the same features.

The three lanterns in the Olantern Classic 2 line
VersionClassic 2 Pro (this review)Classic 2 LiteClassic 2 Pro Smart
Power sourceBuilt-in 11,200 mAh battery4 AA batteriesBuilt-in battery
Power bank functionYes, 18WNoYes
ControlsKnob onlyKnob onlyKnob and Olight app
Stated minimum runtime180h105h180h

The Smart version, released after the one reviewed here, adds Bluetooth control from the Olight app: real-time battery level, timer, a sleep mode that switches the lantern off after 3 hours of inactivity when enabled, and remote tint switching. It sells at a price very close to the original, making it a logical alternative for anyone who values that remote control.

One market signal points the same way: at least one specialist retailer already lists the original grey colourway as discontinued, suggesting a gradual shift toward the Smart line. Before buying, check that the full product name, on the box as on the retailer's listing, does not mention "Smart" if the knob-only version is what you're after, or check for its presence if app control matters to you.

Build quality: metal everywhere, a battery you'll never replace

Build quality is the one point every source agrees on: a steel frame, a 2mm polycarbonate globe, Torx screws rather than plastic clips, and a copper-finished housing that never creaks or flexes at the seams. Under the globe, the orange section combines three vertical tubes and four pot-light LEDs, while the warm white section lines up 16 LEDs, two genuinely separate optical assemblies rather than a single filtered LED array.

The built-in battery pairs four 18650 cells wired in parallel to total 11,200 mAh at 3.6V. That cell format happens to be one of the most standardised on the market, used as a swappable part in plenty of flashlights, Olight's own included. Here, it's soldered and glued in place: no replacement is possible, and the lantern's entire service life follows that of its battery, with no recourse once its charge cycles run out.

Worth noting: the manufacturer warranty on this lantern line is 2 years, not 5 as some product listings state. Since 2023 Olight has offered a lifetime warranty on its flashlights and knives, but that extension does not cover the Olantern line.

No safety recall affects the Olantern Classic 2 Pro to date; the only recall tied to the brand covers two entirely different flashlights, the Warrior Mini and the M2R Pro, pulled in 2022 over a risk of accidental activation in a pocket, an unrelated product with no bearing on the lantern reviewed here.

Weight and size: the price of a genuine metal housing

On the scale, the Olantern Classic 2 Pro lands between 748 and 757 grams depending on the unit, for a base diameter of 124mm and a height of 186mm. Set against the battery's 40.32 Wh, that works out to an energy density of about 53 Wh per kilogram, a mediocre figure for a standalone power bank: a dedicated power bank of comparable size, like the Anker A1695, tops 150 Wh per kilogram.

The comparison is misleading if taken at face value, though. Nearly all of that weight serves the device's primary job: a complete metal frame, a globe protected by a steel cage, a top handle and a hanging ring built to hook the lantern onto a tent awning or a branch. This isn't a power bank that happened to gain a light, it's the other way round.

750 g
on the scale, on average
186 mm
height
124 mm
base diameter
53 Wh/kg
energy density

For anyone after a light, easily packed energy reserve above all, that weight remains a genuine drawback. For anyone after a sturdy lantern that also happens to offer that service, it's entirely justified.

Against other multi-function devices in the same aisle

Against a plain AA-powered lantern, such as the Classic 2 Lite in the same line, the Olantern Classic 2 Pro costs noticeably more up front but removes the battery budget and adds the power bank function. Against a dedicated power bank of comparable capacity, though, it loses on nearly every criterion that makes a good power bank: fewer watt-hours per dollar, no status screen, and a much higher weight for the energy actually available at the output.

Three multi-function devices from the same aisle, different priorities
DeviceOlantern Classic 2 ProNitecore LR70Nitecore NWL30
Functions combinedLantern + power bankFlashlight + lantern + power bankWork light + power bank + mosquito repeller
Battery capacity11,200 mAh10,000 mAh18,000 mAh
PriorityRetro style, metal finishVersatility, high light outputVersatility, job-site use

Both Nitecore units bet on raw versatility and a far higher light output, in a more utilitarian housing. The Olantern flips that priority: fewer peak lumens, but a warm, adjustable light built for ambience, in a housing that belongs on a table rather than in a toolbag.

Against more utilitarian lantern-flashlights with a plainer finish, the Olantern's lumens-per-dollar ratio comes up short: several competing models, without the retro styling, deliver more lumens per dollar spent and take user-replaceable batteries or cells. That gap is real, but it compares two different buying logics: one chases the cheapest possible light, the other wants a finished object, set on a table, that lights a space as well as it decorates it.

The Olantern Classic 2 Pro's real position, then, is neither the cheapest survival lantern nor the most capable power bank: it's a sturdy ambience piece that can bail out a phone, and that's the combination it should be judged on.

Who it suits, and who it doesn't

The Olantern Classic 2 Pro suits, first, anyone who wants a genuine ambience lantern, capable of lasting several nights of camping on its economical setting, and who appreciates being able to bail out a phone without packing an extra accessory. It also suits home backup use, tucked in a drawer for power cuts, or a bedside night light thanks to how gradual its low end is.

It also suits anyone who prefers a knob to an app: no pairing, no updates, no account to create, just a physical motion to set the light. That's a deliberate choice, one not to regret later on discovering the Smart version exists.

It suits less well anyone chiefly after a strong power bank to recharge a phone daily: the watt-hour return per dollar and per gram is weaker than a dedicated power bank's, and the 18W ceiling only holds under specific conditions. It also suits less well anyone who needs remote app control, better served by the Smart version; anyone chasing the most lumens per dollar, better served by a more utilitarian lantern-flashlight with replaceable batteries; and anyone who would rather be able to swap the battery themselves in a few years' time, something the Olantern's glued, soldered assembly will never allow.

The rating in detail

Our rating
3.8/5
Capacity and runtime 4.0
Output power 3.6
Size and weight 3.6
Ports and cables 3.6
Recharging 4.0
Build and endurance 4.0
Olight Olantern Classic 2 Pro: see the full details and price →

The product and its alternatives

Olight Olantern Classic 2 Pro

Olight Olantern Classic 2 Pro

See price (4)

A retro-style camping lantern, dimmable from 10 to 300 lm, controlled by app, with a genuine 18W power bank function to recharge your devices.

View product
Nitecore LR70

Nitecore LR70

See price (3)

Three devices in one: a 3000 lm torch, a 360° camping lantern and a 10,000 mAh power bank, all rechargeable over USB-C.

View product
Nitecore NWL30 Work Light

Nitecore NWL30 Work Light

£81.46 (4)

Light up, recharge and repel mosquitoes: the Nitecore NWL30 is a 3-in-1 work light with 3000 lumens and a built-in 18,000 mAh battery.

View product
Anker A1695 (165W)

Anker A1695 (165W)

See price (48)

With 25,000 mAh, 165 W, two built-in cables and a display, the Anker A1695 power bank even charges a laptop and up to 4 devices at once.

View product

Frequently asked questions

No, not on this version. The rotary knob is the only way to set brightness and tint. Bluetooth and app control exist only on the newer Olantern Classic 2 Pro Smart, sold at a very similar price.

That depends heavily on the setting. At maximum (300 lm), brightness automatically steps down after just 20 minutes to 200, then 150 lumens, for a stated total of about 25 hours, reduced to 17h 56m in practice. On the most economical setting (10 lm), the stated 180-hour runtime is instead exceeded, reaching up to 276 hours.

Rarely at full power. The 18W figure requires the connected device to accept a 12V output step, a voltage most USB-C smartphones never request. In practice, charging a phone runs closer to 5V and 1.5A, about 7.5W, which is still enough to regain a full charge in roughly ninety minutes from under 50%.

About 4 hours with a cable and an 18W USB-C adapter. The magnetic charging dock included alongside it is handier to set down but noticeably slower, needing about 10 hours for a full charge.

No. The four 18650 cells that make it up are soldered and glued in place, even though that cell format is normally swappable in other lights. The manufacturer warranty on this lantern line is 2 years.

The Lite version runs on 4 replaceable AA batteries, has no power bank function and costs less. The Pro version, reviewed here, has a rechargeable battery and an 18W power bank function, controlled solely by its knob. The Pro Smart version adds Bluetooth and app control, at a price very close to the Pro.