An entry-level controller, simple and unapologetic about it
The Steca Solsum 0606 is a PWM (Pulse Width Modulation) solar charge controller from the German manufacturer Steca (now part of the Kontron/Katek group), positioned at the entry level. It has equipped tens of thousands of small off-grid solar setups for years according to the manufacturer, a sign of proven reliability over time.
Its low-loss series PWM technology automatically detects the system voltage (12V or 24V) and delivers up to 6A of charge and discharge current, handling roughly 72W of panels at 12V and 144W at 24V, under a maximum open-circuit voltage of 47V.
Set for AGM and gel, no lithium profile
The Solsum 0606 is factory-set for AGM and gel lead-acid batteries. An optional accessory, the Steca PA RC100 remote, allows adjusting the charging profile and voltage thresholds for other lead-acid battery types, but no LiFePO4 lithium profile is offered, whether standard or via this accessory.
This narrow compatibility fits the logic of a very affordable entry-level product: widening chemistry compatibility would necessarily complicate the electronics and push the price up.
Four LEDs, no screen: the entry-level trade-off, made deliberately
Unlike higher-tier controllers fitted with a graphic LCD screen, the Solsum 0606 sticks to four multicolor LEDs to indicate operation, battery charge status, and any fault messages. There's no numeric percentage, no production history, and no Bluetooth connectivity or app.
This choice comes with a direct upside: the electronic simplicity of this minimal display contributes to the controller's very low self-consumption, under 4mA, a genuine plus for a setup that needs to run continuously without wasting the energy it produces on its own operation.
For anyone needing precise production tracking (data logger, history, exact charge percentage), a higher-tier controller like the same brand's Steca PR 2020 IP65 or Tarom 4545 remains necessary, at a notably higher price.
A full protection list at this price point
Despite its budget positioning, the Solsum 0606 carries a full list of electronic protections: overcharge, deep discharge, reverse polarity (module, load, and battery), automatic electronic fuse, short circuit, input overvoltage, nighttime reverse current protection, and disconnection on battery overvoltage.
| Feature | Detail |
|---|---|
| Technology | PWM, not MPPT |
| Display | 4 multicolor LEDs, no screen |
| Battery compatibility | AGM/gel (factory), no lithium |
| Sealing | IP31 (shelter required) |
| Temperature range | -25 °C to +50 °C |
Operating from -25 °C to +50 °C, the compact housing (145 x 100 x 30mm, about 150g) fits easily anywhere. Its IP31 rating stays limited to dust and vertical drips though: sheltered mounting (electrical enclosure, shed, RV) remains necessary, never exposed outdoor placement.
Who the Solsum 0606 is for
The Solsum 0606 suits a small off-grid lead-acid setup (AGM or gel), a garden shed, a caravan, a cabin, or a backup system, where simplicity and price matter more than precise data tracking. Its very low self-consumption also makes it a good pick for a setup that needs to run continuously unattended.
For a lithium setup, this controller should be ruled out from the start, regardless of budget. And for anyone wanting precise production tracking (numeric screen, data logger, automation), a more complete controller like the same brand's Steca PR 2020 IP65 or Tarom 4545 better answers that need, at a notably higher price.
