Orium MC4 Extension 5m
Two 5m solar leads with pre-fitted MC4 connectors, to move your solar panel away from its battery or power station, with no wiring work.
Characteristics
- Contents: 2 leads of 5m (red + black)
- Connectors: Pre-fitted male and female MC4
- Cable: 4 mm² copper, UV-resistant jacket
- Ready-to-plug MC4-standard extension, for outdoor use
Detailed overview: Orium 5m MC4 solar extension cable (red + black)
The Orium MC4 solar extension cable answers a very common need as soon as you install a solar panel: gaining distance. The cable supplied with a panel is often short, yet you rarely have the controller, battery or power station right next to the panel. This 5-metre extension lets you place the panel where the sun hits hardest, away from where the energy is stored or used.
The set includes two 5 m leads, one red (positive pole) and one black (negative pole), to follow the usual colour code and avoid wiring mistakes. Each lead is fitted at its ends with factory-mounted male and female MC4 connectors: no crimping or tools are needed, you simply clip the connectors, which lock with a click. As MC4 is the universal photovoltaic standard, this extension is compatible with almost all solar panels, controllers, solar suitcases and power stations that use this connector.
On the build side, the cable is copper (4 mm² section) and its jacket resists UV and weather, making it suitable for prolonged outdoor use. The MC4 connectors provide good sealing once clipped, protecting the connection from water and dust.
Simple, universal and rugged, this Orium extension is the basic accessory for any mobile or fixed solar setup. Note: to connect several panels in parallel (to add up the currents), you will also need Y-branch MC4 connectors, sold separately. For simply extending the length from a panel to its controller, this extension does exactly the job.
Frequently asked questions: Orium 5m MC4 solar extension cable (red + black)
MC4 is the universal standard connector of photovoltaics. Its male and female plugs clip together and lock with a click, providing good sealing. Almost all solar panels, controllers and power stations use it.
Yes, as long as your panel (and your controller or station) has MC4 connectors, which is the case for the vast majority of setups. You simply clip the matching connectors together.
This extension links one panel to its controller or station. To connect several panels in parallel and add up their currents, you need to add Y-branch MC4 connectors, sold separately.
Yes. The copper cable has a UV- and weather-resistant jacket, and the MC4 connectors provide good sealing once clipped, which makes it suitable for prolonged outdoor use.
Other products in the "MC4 cables and connectors" category
Allpowers 16AWG Adapter Cable
19.99€ (3)
This Allpowers cable connects a solar panel with an MC4 output to a power station via a 5.5 mm DC plug: the handy accessory to recharge in the sun.
EcoFlow Solar extension cable
49.00€ (12)
Three extra metres of reach for your solar panel: keep your power station in the shade while the panel stays in full sun.
EcoFlow Solar parallel cable
25.00€ (4)
Wire several solar panels in parallel to recharge your EcoFlow station faster: the essential cable to multiply the power you capture.
Published on 11/07/2026




