Epever XTRA1210N
(23 reviews)
A 10A MPPT controller that harvests up to 30% more output: the Epever XTRA1210N optimises your small solar kit and protects your battery, with a display to match.
Characteristics
- Type: MPPT, 10A
- Voltage: 12/24V automatic
- PV input: Up to 100V
- Compatibility: Lead, Gel, AGM, lithium
- MPPT 10A, up to 30% gain, display
Detailed overview: Epever XTRA1210N 10A MPPT solar charge controller
The Epever XTRA1210N is a 10A MPPT (Maximum Power Point Tracking) solar charge controller, designed to get the best from a small 12V or 24V solar kit. It is aimed at those equipping a van, motorhome, shed, boat or small off-grid installation who want to maximise their panels' output while protecting their battery.
Its main interest is its MPPT technology. Unlike a basic PWM controller, MPPT continuously seeks the panels' maximum power point and converts the excess voltage into usable current. The gain can reach 30% versus PWM, especially in low light, at the start and end of the day or in cloudy weather. In practice, your battery recharges faster and more fully.
It automatically detects the system voltage (12 or 24V) and accepts a PV input voltage up to 100V open circuit, which leaves headroom to wire panels in series. It handles all the main battery types (flooded lead, Gel, AGM and lithium), with suitable charge profiles, making it ideal to pair with a LiFePO4 battery as well as an auxiliary lead battery.
Safety relies on comprehensive protections: overcharge, over-discharge, short circuit, overcurrent, reverse polarity and overheating. The XDS2 version comes with a remote display that clearly shows output, voltage and state of charge, for easy monitoring of the installation.
Reliable, effective and versatile, the Epever XTRA1210N is an excellent choice to optimise a small off-grid solar system, from one of the reference brands in solar charge controllers.
Our tester's review: Julien De Jurquet
The XTRA1210N is an excellent entry into serious MPPT, at a contained price. On a small van or shed solar kit, the difference with a PWM controller shows mainly in cloudy weather or at the start and end of the day: MPPT harvests a few percent, sometimes much more, where PWM plateaus. The automatic 12/24V detection is handy, and compatibility with lithium as well as lead or Gel batteries makes it versatile. The remote XDS2 display is genuinely appreciated for monitoring output and state of charge without contorting near the controller. The built-in protections (overcharge, short circuit, reverse polarity) are reassuring at install. Two honest caveats: 10A limits it to small kits (about 130W at 12V, 260W at 24V), and fine setup requires a minimum of reading the manual, especially for the lithium profile. To optimise a small solar system without breaking the bank, it is a safe bet from the reference brand Epever.
Frequently asked questions: Epever XTRA1210N 10A MPPT solar charge controller
An MPPT controller like the XTRA1210N seeks the panels' maximum power point and converts excess voltage into usable current, with a gain of up to 30% versus a PWM, especially in low light. Your battery recharges faster and more fully.
With 10A of charge current, it suits small kits: about 130 W of panels at 12V and 260 W at 24V. It accepts a PV input voltage up to 100V, which allows wiring panels in series.
Yes, it handles all the main battery types: flooded lead, Gel, AGM and lithium (LiFePO4), with suitable charge profiles. Remember to select the right battery type in the settings for optimal, safe charging.
Other products in the "Charge controllers" category
Victron Energy BlueSolar MPPT 75/15
81.99€ (17)
One of the most popular and affordable MPPT charge controllers. The ideal choice if you prefer this type of solar controller.
Published on 10/07/2026